Documentation Home
MySQL 8.0 Reference Manual
Related Documentation Download this Manual
PDF (US Ltr) - 46.1Mb
PDF (A4) - 46.1Mb
PDF (RPM) - 41.5Mb
HTML Download (TGZ) - 10.6Mb
HTML Download (Zip) - 10.6Mb
HTML Download (RPM) - 9.1Mb
Man Pages (TGZ) - 220.4Kb
Man Pages (Zip) - 325.8Kb
Info (Gzip) - 4.1Mb
Info (Zip) - 4.1Mb
Excerpts from this Manual

MySQL 8.0 Reference Manual  /  ...  /  MySQL Source-Configuration Options

2.9.4 MySQL Source-Configuration Options

The CMake program provides a great deal of control over how you configure a MySQL source distribution. Typically, you do this using options on the CMake command line. For information about options supported by CMake, run either of these commands in the top-level source directory:

cmake . -LH
ccmake .

You can also affect CMake using certain environment variables. See Section 4.9, “MySQL Environment Variables”.

For boolean options, the value may be specified as 1 or ON to enable the option, or as 0 or OFF to disable the option.

Many options configure compile-time defaults that can be overridden at server startup. For example, the CMAKE_INSTALL_PREFIX, MYSQL_TCP_PORT, and MYSQL_UNIX_ADDR options that configure the default installation base directory location, TCP/IP port number, and Unix socket file can be changed at server startup with the --basedir, --port, and --socket options for mysqld. Where applicable, configuration option descriptions indicate the corresponding mysqld startup option.

The following sections provide more information about CMake options.

CMake Option Reference

The following table shows the available CMake options. In the Default column, PREFIX stands for the value of the CMAKE_INSTALL_PREFIX option, which specifies the installation base directory. This value is used as the parent location for several of the installation subdirectories.

Table 2.13 MySQL Source-Configuration Option Reference (CMake)

Formats Description Default Introduced Removed
BUILD_CONFIG Use same build options as official releases
BUNDLE_RUNTIME_LIBRARIES Bundle runtime libraries with server MSI and Zip packages for Windows OFF 8.0.11
CMAKE_BUILD_TYPE Type of build to produce RelWithDebInfo
CMAKE_CXX_FLAGS Flags for C++ Compiler
CMAKE_C_FLAGS Flags for C Compiler
CMAKE_INSTALL_PREFIX Installation base directory /usr/local/mysql
COMPILATION_COMMENT Comment about compilation environment
COMPILATION_COMMENT_SERVER Comment about compilation environment for use by mysqld 8.0.14
CPACK_MONOLITHIC_INSTALL Whether package build produces single file OFF
DEFAULT_CHARSET The default server character set utf8mb4
DEFAULT_COLLATION The default server collation utf8mb4_0900_ai_ci
DISABLE_DATA_LOCK Exclude the performance schema data lock instrumentation OFF
DISABLE_PSI_COND Exclude Performance Schema condition instrumentation OFF
DISABLE_PSI_ERROR Exclude the performance schema server error instrumentation OFF
DISABLE_PSI_FILE Exclude Performance Schema file instrumentation OFF
DISABLE_PSI_IDLE Exclude Performance Schema idle instrumentation OFF
DISABLE_PSI_MEMORY Exclude Performance Schema memory instrumentation OFF
DISABLE_PSI_METADATA Exclude Performance Schema metadata instrumentation OFF
DISABLE_PSI_MUTEX Exclude Performance Schema mutex instrumentation OFF
DISABLE_PSI_PS Exclude the performance schema prepared statements OFF
DISABLE_PSI_RWLOCK Exclude Performance Schema rwlock instrumentation OFF
DISABLE_PSI_SOCKET Exclude Performance Schema socket instrumentation OFF
DISABLE_PSI_SP Exclude Performance Schema stored program instrumentation OFF
DISABLE_PSI_STAGE Exclude Performance Schema stage instrumentation OFF
DISABLE_PSI_STATEMENT Exclude Performance Schema statement instrumentation OFF
DISABLE_PSI_STATEMENT_DIGEST Exclude Performance Schema statements_digest instrumentation OFF
DISABLE_PSI_TABLE Exclude Performance Schema table instrumentation OFF
DISABLE_PSI_THREAD Exclude the performance schema thread instrumentation OFF
DISABLE_PSI_TRANSACTION Exclude the performance schema transaction instrumentation OFF
DISABLE_SHARED Do not build shared libraries, compile position-dependent code OFF
DOWNLOAD_BOOST Whether to download the Boost library OFF
DOWNLOAD_BOOST_TIMEOUT Timeout in seconds for downloading the Boost library 600
ENABLED_LOCAL_INFILE Whether to enable LOCAL for LOAD DATA OFF
ENABLED_PROFILING Whether to enable query profiling code ON
ENABLE_DEBUG_SYNC Whether to enable Debug Sync support ON 8.0.1
ENABLE_DOWNLOADS Whether to download optional files OFF
ENABLE_DTRACE Whether to include DTrace support 8.0.1
ENABLE_EXPERIMENTAL_SYSVARS Whether to enabled experimental InnoDB system variables OFF 8.0.11
ENABLE_GCOV Whether to include gcov support
ENABLE_GPROF Enable gprof (optimized Linux builds only) OFF
FORCE_INSOURCE_BUILD Whether to force an in-source build OFF 8.0.14
FORCE_UNSUPPORTED_COMPILER Whether to permit unsupported compiler OFF
IGNORE_AIO_CHECK With -DBUILD_CONFIG=mysql_release, ignore libaio check OFF
INSTALL_BINDIR User executables directory PREFIX/bin
INSTALL_DOCDIR Documentation directory PREFIX/docs
INSTALL_DOCREADMEDIR README file directory PREFIX
INSTALL_INCLUDEDIR Header file directory PREFIX/include
INSTALL_INFODIR Info file directory PREFIX/docs
INSTALL_LAYOUT Select predefined installation layout STANDALONE
INSTALL_LIBDIR Library file directory PREFIX/lib
INSTALL_MANDIR Manual page directory PREFIX/man
INSTALL_MYSQLKEYRINGDIR Directory for keyring_file plugin data file platform specific
INSTALL_MYSQLSHAREDIR Shared data directory PREFIX/share
INSTALL_MYSQLTESTDIR mysql-test directory PREFIX/mysql-test
INSTALL_PKGCONFIGDIR Directory for mysqlclient.pc pkg-config file INSTALL_LIBDIR/pkgconfig
INSTALL_PLUGINDIR Plugin directory PREFIX/lib/plugin
INSTALL_SBINDIR Server executable directory PREFIX/bin
INSTALL_SECURE_FILE_PRIVDIR secure_file_priv default value platform specific
INSTALL_SHAREDIR aclocal/mysql.m4 installation directory PREFIX/share
INSTALL_STATIC_LIBRARIES Whether to install static libraries ON
INSTALL_SUPPORTFILESDIR Extra support files directory PREFIX/support-files
LINK_RANDOMIZE Whether to randomize order of symbols in mysqld binary OFF 8.0.1
LINK_RANDOMIZE_SEED Seed value for LINK_RANDOMIZE option mysql 8.0.1
MAX_INDEXES Maximum indexes per table 64
MUTEX_TYPE InnoDB mutex type event
MYSQLX_TCP_PORT TCP/IP port number used by X Plugin 33060
MYSQLX_UNIX_ADDR Unix socket file used by X Plugin /tmp/mysqlx.sock
MYSQL_DATADIR Data directory
MYSQL_MAINTAINER_MODE Whether to enable MySQL maintainer-specific development environment OFF
MYSQL_PROJECT_NAME Windows/OS X project name MySQL
MYSQL_TCP_PORT TCP/IP port number 3306
MYSQL_UNIX_ADDR Unix socket file /tmp/mysql.sock
ODBC_INCLUDES ODBC includes directory
ODBC_LIB_DIR ODBC library directory
OPTIMIZER_TRACE Whether to support optimizer tracing
REPRODUCIBLE_BUILD Take extra care to create a build result independent of build location and time 8.0.11
SYSCONFDIR Option file directory
SYSTEMD_PID_DIR Directory for PID file under systemd /var/run/mysqld
SYSTEMD_SERVICE_NAME Name of MySQL service under systemd mysqld
TMPDIR tmpdir default value
USE_LD_GOLD Whether to use GNU gold linker ON 8.0.0
USE_LD_LLD Whether to use llvm lld linker ON 8.0.16
WIN_DEBUG_NO_INLINE Whether to disable function inlining OFF
WITHOUT_xxx_STORAGE_ENGINE Exclude storage engine xxx from build
WITH_ANT Path to Ant for building GCS Java wrapper 8.0.11
WITH_ASAN Enable AddressSanitizer OFF
WITH_ASAN_SCOPE Enable AddressSanitizer -fsanitize-address-use-after-scope Clang flag OFF 8.0.4
WITH_AUTHENTICATION_LDAP Whether to report error if LDAP authentication plugins cannot be built OFF 8.0.2
WITH_AUTHENTICATION_PAM Build PAM authentication plugin OFF
WITH_AWS_SDK Location of Amazon Web Services software development kit 8.0.2
WITH_BOOST The location of the Boost library sources
WITH_CLIENT_PROTOCOL_TRACING Build client-side protocol tracing framework ON
WITH_CURL Location of curl library 8.0.2
WITH_DEBUG Whether to include debugging support OFF
WITH_DEFAULT_COMPILER_OPTIONS Whether to use default compiler options ON
WITH_DEFAULT_FEATURE_SET Whether to use default feature set ON
WITH_EDITLINE Which libedit/editline library to use bundled
WITH_GMOCK Path to googlemock distribution
WITH_ICU Type of ICU support bundled 8.0.4
WITH_INNODB_EXTRA_DEBUG Whether to include extra debugging support for InnoDB. OFF
WITH_INNODB_MEMCACHED Whether to generate memcached shared libraries. OFF
WITH_JEMALLOC Whether to link with -ljemalloc OFF 8.0.16
WITH_KEYRING_TEST Build the keyring test program OFF
WITH_LIBEVENT Which libevent library to use bundled
WITH_LIBWRAP Whether to include libwrap (TCP wrappers) support OFF
WITH_LOCK_ORDER Whether to enable LOCK_ORDER tooling OFF 8.0.17
WITH_LSAN Whether to run LeakSanitizer, without AddressSanitizer OFF 8.0.16
WITH_LTO Enable link-time optimizer OFF 8.0.13
WITH_LZ4 Type of LZ4 library support bundled
WITH_LZMA Type of LZMA library support bundled 8.0.4 8.0.16
WITH_MECAB Compiles MeCab
WITH_MSAN Enable MemorySanitizer OFF
WITH_MSCRT_DEBUG Enable Visual Studio CRT memory leak tracing OFF
WITH_MYSQLX Whether to disable X Protocol ON 8.0.11
WITH_NUMA Set NUMA memory allocation policy
WITH_PROTOBUF Which Protocol Buffers package to use bundled
WITH_RAPID Whether to build rapid development cycle plugins ON
WITH_RAPIDJSON Type of RapidJSON support bundled 8.0.13
WITH_RE2 Type of RE2 library support bundled 8.0.4 8.0.18
WITH_ROUTER Whether to build MySQL Router ON 8.0.16
WITH_SSL Type of SSL support system
WITH_SYSTEMD Enable installation of systemd support files OFF
WITH_SYSTEM_LIBS Set system value of library options not set explicitly OFF 8.0.11
WITH_TEST_TRACE_PLUGIN Build test protocol trace plugin OFF
WITH_TSAN Enable ThreadSanitizer OFF
WITH_UBSAN Enable Undefined Behavior Sanitizer OFF
WITH_UNIT_TESTS Compile MySQL with unit tests ON
WITH_UNIXODBC Enable unixODBC support OFF
WITH_VALGRIND Whether to compile in Valgrind header files OFF
WITH_ZLIB Type of zlib support bundled
WITH_xxx_STORAGE_ENGINE Compile storage engine xxx statically into server

General Options

  • -DBUILD_CONFIG=mysql_release

    This option configures a source distribution with the same build options used by Oracle to produce binary distributions for official MySQL releases.

  • -DBUNDLE_RUNTIME_LIBRARIES=bool

    Whether to bundle runtime libraries with server MSI and Zip packages for Windows.

  • -DCMAKE_BUILD_TYPE=type

    The type of build to produce:

    • RelWithDebInfo: Enable optimizations and generate debugging information. This is the default MySQL build type.

    • Release: Enable optimizations but omit debugging information to reduce the build size. This build type was added in MySQL 8.0.13.

    • Debug: Disable optimizations and generate debugging information. This build type is also used if the WITH_DEBUG option is enabled. That is, -DWITH_DEBUG=1 has the same effect as -DCMAKE_BUILD_TYPE=Debug.

  • -DCPACK_MONOLITHIC_INSTALL=bool

    This option affects whether the make package operation produces multiple installation package files or a single file. If disabled, the operation produces multiple installation package files, which may be useful if you want to install only a subset of a full MySQL installation. If enabled, it produces a single file for installing everything.

  • -DFORCE_INSOURCE_BUILD=bool

    Defines whether to force an in-source build. Out-of-source builds are recommended, as they permit multiple builds from the same source, and cleanup can be performed quickly by removing the build directory. To force an in-source build, invoke CMake with -DFORCE_INSOURCE_BUILD=ON.

Installation Layout Options

The CMAKE_INSTALL_PREFIX option indicates the base installation directory. Other options with names of the form INSTALL_xxx that indicate component locations are interpreted relative to the prefix and their values are relative pathnames. Their values should not include the prefix.

  • -DCMAKE_INSTALL_PREFIX=dir_name

    The installation base directory.

    This value can be set at server startup with the --basedir option.

  • -DINSTALL_BINDIR=dir_name

    Where to install user programs.

  • -DINSTALL_DOCDIR=dir_name

    Where to install documentation.

  • -DINSTALL_DOCREADMEDIR=dir_name

    Where to install README files.

  • -DINSTALL_INCLUDEDIR=dir_name

    Where to install header files.

  • -DINSTALL_INFODIR=dir_name

    Where to install Info files.

  • -DINSTALL_LAYOUT=name

    Select a predefined installation layout:

    • STANDALONE: Same layout as used for .tar.gz and .zip packages. This is the default.

    • RPM: Layout similar to RPM packages.

    • SVR4: Solaris package layout.

    • DEB: DEB package layout (experimental).

    You can select a predefined layout but modify individual component installation locations by specifying other options. For example:

    cmake . -DINSTALL_LAYOUT=SVR4 -DMYSQL_DATADIR=/var/mysql/data

    The INSTALL_LAYOUT value determines the default value of the secure_file_priv, keyring_encrypted_file_data, and keyring_file_data system variables. See the descriptions of those variables in Section 5.1.8, “Server System Variables”, and Section 6.4.4.11, “Keyring System Variables”.

  • -DINSTALL_LIBDIR=dir_name

    Where to install library files.

  • -DINSTALL_MANDIR=dir_name

    Where to install manual pages.

  • -DINSTALL_MYSQLKEYRINGDIR=dir_path

    The default directory to use as the location of the keyring_file plugin data file. The default value is platform specific and depends on the value of the INSTALL_LAYOUT CMake option; see the description of the keyring_file_data system variable in Section 5.1.8, “Server System Variables”.

  • -DINSTALL_MYSQLSHAREDIR=dir_name

    Where to install shared data files.

  • -DINSTALL_MYSQLTESTDIR=dir_name

    Where to install the mysql-test directory. To suppress installation of this directory, explicitly set the option to the empty value (-DINSTALL_MYSQLTESTDIR=).

  • -DINSTALL_PKGCONFIGDIR=dir_name

    The directory in which to install the mysqlclient.pc file for use by pkg-config. The default value is INSTALL_LIBDIR/pkgconfig, unless INSTALL_LIBDIR ends with /mysql, in which case that is removed first.

  • -DINSTALL_PLUGINDIR=dir_name

    The location of the plugin directory.

    This value can be set at server startup with the --plugin_dir option.

  • -DINSTALL_SBINDIR=dir_name

    Where to install the mysqld server.

  • -DINSTALL_SECURE_FILE_PRIVDIR=dir_name

    The default value for the secure_file_priv system variable. The default value is platform specific and depends on the value of the INSTALL_LAYOUT CMake option; see the description of the secure_file_priv system variable in Section 5.1.8, “Server System Variables”.

  • -DINSTALL_SHAREDIR=dir_name

    Where to install aclocal/mysql.m4.

  • -DINSTALL_STATIC_LIBRARIES=bool

    Whether to install static libraries. The default is ON. If set to OFF, these libraries are not installed: libmysqlclient.a, libmysqlservices.a.

  • -DINSTALL_SUPPORTFILESDIR=dir_name

    Where to install extra support files.

  • -DLINK_RANDOMIZE=bool

    Whether to randomize the order of symbols in the mysqld binary. The default is OFF. This option should be enabled only for debugging purposes.

  • -DLINK_RANDOMIZE_SEED=val

    Seed value for the LINK_RANDOMIZE option. The value is a string. The default is mysql, an arbitrary choice.

  • -DMYSQL_DATADIR=dir_name

    The location of the MySQL data directory.

    This value can be set at server startup with the --datadir option.

  • -DODBC_INCLUDES=dir_name

    The location of the ODBC includes directory, and may be used while configuring Connector/ODBC.

  • -DODBC_LIB_DIR=dir_name

    The location of the ODBC library directory, and may be used while configuring Connector/ODBC.

  • -DSYSCONFDIR=dir_name

    The default my.cnf option file directory.

    This location cannot be set at server startup, but you can start the server with a given option file using the --defaults-file=file_name option, where file_name is the full path name to the file.

  • -DSYSTEMD_PID_DIR=dir_name

    The name of the directory in which to create the PID file when MySQL is managed by systemd. The default is /var/run/mysqld; this might be changed implicitly according to the INSTALL_LAYOUT value.

    This option is ignored unless WITH_SYSTEMD is enabled.

  • -DSYSTEMD_SERVICE_NAME=name

    The name of the MySQL service to use when MySQL is managed by systemd. The default is mysqld; this might be changed implicitly according to the INSTALL_LAYOUT value.

    This option is ignored unless WITH_SYSTEMD is enabled.

  • -DTMPDIR=dir_name

    The default location to use for the tmpdir system variable. If unspecified, the value defaults to P_tmpdir in <stdio.h>.

Storage Engine Options

Storage engines are built as plugins. You can build a plugin as a static module (compiled into the server) or a dynamic module (built as a dynamic library that must be installed into the server using the INSTALL PLUGIN statement or the --plugin-load option before it can be used). Some plugins might not support static or dynamic building.

The InnoDB, MyISAM, MERGE, MEMORY, and CSV engines are mandatory (always compiled into the server) and need not be installed explicitly.

To compile a storage engine statically into the server, use -DWITH_engine_STORAGE_ENGINE=1. Some permissible engine values are ARCHIVE, BLACKHOLE, EXAMPLE, FEDERATED, and NDB or NDBCLUSTER (NDB support). Examples:

-DWITH_ARCHIVE_STORAGE_ENGINE=1
-DWITH_BLACKHOLE_STORAGE_ENGINE=1
Note

It is not possible to compile without Performance Schema support. If it is desired to compile without particular types of instrumentation, that can be done with the following CMake options:

DISABLE_PSI_COND
DISABLE_PSI_DATA_LOCK
DISABLE_PSI_ERROR
DISABLE_PSI_FILE
DISABLE_PSI_IDLE
DISABLE_PSI_MEMORY
DISABLE_PSI_METADATA
DISABLE_PSI_MUTEX
DISABLE_PSI_PS
DISABLE_PSI_RWLOCK
DISABLE_PSI_SOCKET
DISABLE_PSI_SP
DISABLE_PSI_STAGE
DISABLE_PSI_STATEMENT
DISABLE_PSI_STATEMENT_DIGEST
DISABLE_PSI_TABLE
DISABLE_PSI_THREAD
DISABLE_PSI_TRANSACTION

For example, to compile without mutex instrumentation, configure MySQL using the -DDISABLE_PSI_MUTEX=1 option.

To exclude a storage engine from the build, use -DWITH_engine_STORAGE_ENGINE=0. Examples:

-DWITH_ARCHIVE_STORAGE_ENGINE=0
-DWITH_EXAMPLE_STORAGE_ENGINE=0
-DWITH_FEDERATED_STORAGE_ENGINE=0

It is also possible to exclude a storage engine from the build using -DWITHOUT_engine_STORAGE_ENGINE=1 (but -DWITH_engine_STORAGE_ENGINE=0 is preferred). Examples:

-DWITHOUT_ARCHIVE_STORAGE_ENGINE=1
-DWITHOUT_EXAMPLE_STORAGE_ENGINE=1
-DWITHOUT_FEDERATED_STORAGE_ENGINE=1

If neither -DWITH_engine_STORAGE_ENGINE nor -DWITHOUT_engine_STORAGE_ENGINE are specified for a given storage engine, the engine is built as a shared module, or excluded if it cannot be built as a shared module.

Feature Options

  • -DCOMPILATION_COMMENT=string

    A descriptive comment about the compilation environment. As of MySQL 8.0.14, mysqld uses COMPILATION_COMMENT_SERVER. Other programs continue to use COMPILATION_COMMENT.

  • -DCOMPILATION_COMMENT_SERVER=string

    A descriptive comment about the compilation environment for use by mysqld (for example, to set the version_comment system variable). This option was added in MySQL 8.0.14. Prior to 8.0.14, the server uses COMPILATION_COMMENT.

  • -DDEFAULT_CHARSET=charset_name

    The server character set. By default, MySQL uses the utf8mb4 character set.

    charset_name may be one of binary, armscii8, ascii, big5, cp1250, cp1251, cp1256, cp1257, cp850, cp852, cp866, cp932, dec8, eucjpms, euckr, gb2312, gbk, geostd8, greek, hebrew, hp8, keybcs2, koi8r, koi8u, latin1, latin2, latin5, latin7, macce, macroman, sjis, swe7, tis620, ucs2, ujis, utf8, utf8mb4, utf16, utf16le, utf32. The permissible character sets are listed in the cmake/character_sets.cmake file as the value of CHARSETS_AVAILABLE.

    This value can be set at server startup with the --character_set_server option.

  • -DDEFAULT_COLLATION=collation_name

    The server collation. By default, MySQL uses utf8mb4_0900_ai_ci. Use the SHOW COLLATION statement to determine which collations are available for each character set.

    This value can be set at server startup with the --collation_server option.

  • -DDISABLE_PSI_COND=bool

    Whether to exclude the Performance Schema condition instrumentation. The default is OFF (include).

  • -DDISABLE_PSI_FILE=bool

    Whether to exclude the Performance Schema file instrumentation. The default is OFF (include).

  • -DDISABLE_PSI_IDLE=bool

    Whether to exclude the Performance Schema idle instrumentation. The default is OFF (include).

  • -DDISABLE_PSI_MEMORY=bool

    Whether to exclude the Performance Schema memory instrumentation. The default is OFF (include).

  • -DDISABLE_PSI_METADATA=bool

    Whether to exclude the Performance Schema metadata instrumentation. The default is OFF (include).

  • -DDISABLE_PSI_MUTEX=bool

    Whether to exclude the Performance Schema mutex instrumentation. The default is OFF (include).

  • -DDISABLE_PSI_RWLOCK=bool

    Whether to exclude the Performance Schema rwlock instrumentation. The default is OFF (include).

  • -DDISABLE_PSI_SOCKET=bool

    Whether to exclude the Performance Schema socket instrumentation. The default is OFF (include).

  • -DDISABLE_PSI_SP=bool

    Whether to exclude the Performance Schema stored program instrumentation. The default is OFF (include).

  • -DDISABLE_PSI_STAGE=bool

    Whether to exclude the Performance Schema stage instrumentation. The default is OFF (include).

  • -DDISABLE_PSI_STATEMENT=bool

    Whether to exclude the Performance Schema statement instrumentation. The default is OFF (include).

  • -DDISABLE_PSI_STATEMENT_DIGEST=bool

    Whether to exclude the Performance Schema statement_digest instrumentation. The default is OFF (include).

  • -DDISABLE_PSI_TABLE=bool

    Whether to exclude the Performance Schema table instrumentation. The default is OFF (include).

  • -DDISABLE_SHARED=bool

    Whether to disable building build shared libraries and compile position-dependent code. The default is OFF (compile position-independent code).

    Enabling this option disables -fPIC, with the consequence that shared libraries are not built, including plugins and components. Invoking CMake produces this warning: Dynamic plugins are disabled.

  • -DDISABLE_PSI_PS=bool

    Exclude the performance schema prepared statements instances instrumentation. The default is OFF (include).

  • -DDISABLE_PSI_THREAD=bool

    Exclude the performance schema thread instrumentation. The default is OFF (include).

    Only disable threads when building without any instrumentation, because other instrumentations have a dependency on threads.

  • -DDISABLE_PSI_TRANSACTION=bool

    Exclude the performance schema transaction instrumentation. The default is OFF (include).

  • -DDISABLE_PSI_DATA_LOCK=bool

    Exclude the performance schema data lock instrumentation. The default is OFF (include).

  • -DDISABLE_PSI_ERROR=bool

    Exclude the performance schema server error instrumentation. The default is OFF (include).

  • -DDOWNLOAD_BOOST=bool

    Whether to download the Boost library. The default is OFF.

    See the WITH_BOOST option for additional discussion about using Boost.

  • -DDOWNLOAD_BOOST_TIMEOUT=seconds

    The timeout in seconds for downloading the Boost library. The default is 600 seconds.

    See the WITH_BOOST option for additional discussion about using Boost.

  • -DENABLE_DEBUG_SYNC=bool

    As of MySQL 8.0.1, ENABLE_DEBUG_SYNC is removed and enabling WITH_DEBUG enables Debug Sync.

  • -DENABLE_DOWNLOADS=bool

    Whether to download optional files. For example, with this option enabled, CMake downloads the Google Test distribution that is used by the test suite to run unit tests, or Ant and JUnit required for building GCS Java wrapper.

  • -DENABLE_DTRACE=bool

    Whether to include support for DTrace probes.

    This option was removed in MySQL 8.0.1.

  • -DENABLE_EXPERIMENTAL_SYSVARS=bool

    Whether to enable experimental InnoDB system variables. Experimental system variables are intended for those engaged in MySQL development, should only be used in a development or test environment, and may be removed without notice in a future MySQL release. For information about experimental system variables, refer to /storage/innobase/handler/ha_innodb.cc in the MySQL source tree. Experimental system variables can be identified by searching for PLUGIN_VAR_EXPERIMENTAL.

  • -DENABLE_GCOV=bool

    Whether to include gcov support (Linux only).

  • -DENABLE_GPROF=bool

    Whether to enable gprof (optimized Linux builds only).

  • -DENABLED_LOCAL_INFILE=bool

    This option controls the compiled-in default LOCAL capability for the MySQL client library. Clients that make no explicit arrangements therefore have LOCAL capability disabled or enabled according to the ENABLED_LOCAL_INFILE setting specified at MySQL build time.

    By default, the client library in MySQL binary distributions is compiled with ENABLED_LOCAL_INFILE disabled. If you compile MySQL from source, configure it with ENABLED_LOCAL_INFILE disabled or enabled based on whether clients that make no explicit arrangements should have LOCAL capability disabled or enabled, respectively.

    ENABLED_LOCAL_INFILE controls the default for client-side LOCAL capability. For the server, the local_infile system variable controls server-side LOCAL capability. To explicitly cause the server to refuse or permit LOAD DATA LOCAL statements (regardless of how client programs and libraries are configured at build time or runtime), start mysqld with local_infile disabled or enabled, respectively. local_infile can also be set at runtime. See Section 6.1.6, “Security Issues with LOAD DATA LOCAL”.

  • -DENABLED_PROFILING=bool

    Whether to enable query profiling code (for the SHOW PROFILE and SHOW PROFILES statements).

  • -DFORCE_UNSUPPORTED_COMPILER=bool

    By default, CMake checks for minimum versions of supported compilers: Visual Studio 2015 (Windows); GCC 4.8 or Clang 3.4 (Linux); Developer Studio 12.5 (Solaris server); Developer Studio 12.4 or GCC 4.8 (Solaris client library); Clang 3.6 (macOS), Clang 3.4 (FreeBSD). To disable this check, use -DFORCE_UNSUPPORTED_COMPILER=ON.

  • -DIGNORE_AIO_CHECK=bool

    If the -DBUILD_CONFIG=mysql_release option is given on Linux, the libaio library must be linked in by default. If you do not have libaio or do not want to install it, you can suppress the check for it by specifying -DIGNORE_AIO_CHECK=1.

  • -DMAX_INDEXES=num

    The maximum number of indexes per table. The default is 64. The maximum is 255. Values smaller than 64 are ignored and the default of 64 is used.

  • -DMYSQL_MAINTAINER_MODE=bool

    Whether to enable a MySQL maintainer-specific development environment. If enabled, this option causes compiler warnings to become errors.

  • -DMUTEX_TYPE=type

    The mutex type used by InnoDB. Options include:

    • event: Use event mutexes. This is the default value and the original InnoDB mutex implementation.

    • sys: Use POSIX mutexes on UNIX systems. Use CRITICAL_SECTION onjects on Windows, if available.

    • futex: Use Linux futexes instead of condition variables to schedule waiting threads.

  • -DMYSQLX_TCP_PORT=port_num

    The port number on which X Plugin listens for TCP/IP connections. The default is 33060.

    This value can be set at server startup with the mysqlx_port system variable.

  • -DMYSQLX_UNIX_ADDR=file_name

    The Unix socket file path on which the server listens for X Plugin socket connections. This must be an absolute path name. The default is /tmp/mysqlx.sock.

    This value can be set at server startup with the mysqlx_port system variable.

  • -DMYSQL_PROJECT_NAME=name

    For Windows or macOS, the project name to incorporate into the project file name.

  • -DMYSQL_TCP_PORT=port_num

    The port number on which the server listens for TCP/IP connections. The default is 3306.

    This value can be set at server startup with the --port option.

  • -DMYSQL_UNIX_ADDR=file_name

    The Unix socket file path on which the server listens for socket connections. This must be an absolute path name. The default is /tmp/mysql.sock.

    This value can be set at server startup with the --socket option.

  • -DOPTIMIZER_TRACE=bool

    Whether to support optimizer tracing. See MySQL Internals: Tracing the Optimizer.

  • -DREPRODUCIBLE_BUILD=bool

    For builds on Linux systems, this option controls whether to take extra care to create a build result independent of build location and time.

    This option was added in MySQL 8.0.11. As of MySQL 8.0.12, it defaults to ON for RelWithDebInfo builds.

  • -DUSE_LD_GOLD=bool

    CMake causes the build process to link with the GNU gold linker if it is available and not explicitly disabled. To disable use of this linker, specify the -DUSE_LD_GOLD=OFF option.

  • -DUSE_LD_LLD=bool

    CMake causes the build process to link with the llvm lld linker for Clang if it is available and not explicitly disabled. To disable use of this linker, specify the -DUSE_LD_LLD=OFF option.

    This option was added in MySQL 8.0.16.

  • -DWIN_DEBUG_NO_INLINE=bool

    Whether to disable function inlining on Windows. The default is off (inlining enabled).

  • -DWITH_ANT=path_name

    Set the path to Ant, required when building GCS Java wrapper. Works in a similar way to the existing WITH_BOOST CMake option. Set WITH_ANT to the path of a directory where the Ant tarball, or an already unpacked archive, is saved. When WITH_ANT is not set, or is set with the special value system, the build assumes a binary ant exists in $PATH.

  • -DWITH_ASAN=bool

    Whether to enable the AddressSanitizer, for compilers that support it. The default is off.

  • -DWITH_ASAN_SCOPE=bool

    Whether to enable the AddressSanitizer -fsanitize-address-use-after-scope Clang flag for use-after-scope detection. The default is off. To use this option, -DWITH_ASAN must also be enabled.

  • -DWITH_AUTHENTICATION_LDAP=bool

    Whether to report an error if the LDAP authentication plugins cannot be built:

    • If this option is disabled (the default), the LDAP plugins are built if the required header files and libraries are found. If they are not, CMake displays a note about it.

    • If this option is enabled, a failure to find the required header file andlibraries causes CMake to produce an error, preventing the server from being built.

  • -DWITH_AUTHENTICATION_PAM=bool

    Whether to build the PAM authentication plugin, for source trees that include this plugin. (See Section 6.4.1.5, “PAM Pluggable Authentication”.) If this option is specified and the plugin cannot be compiled, the build fails.

  • -DWITH_AWS_SDK=path_name

    The location of the Amazon Web Services software development kit.

  • -DWITH_BOOST=path_name

    The Boost library is required to build MySQL. These CMake options enable control over the library source location, and whether to download it automatically:

    • -DWITH_BOOST=path_name specifies the Boost library directory location. It is also possible to specify the Boost location by setting the BOOST_ROOT or WITH_BOOST environment variable.

      -DWITH_BOOST=system is also permitted and indicates that the correct version of Boost is installed on the compilation host in the standard location. In this case, the installed version of Boost is used rather than any version included with a MySQL source distribution.

    • -DDOWNLOAD_BOOST=bool specifies whether to download the Boost source if it is not present in the specified location. The default is OFF.

    • -DDOWNLOAD_BOOST_TIMEOUT=seconds the timeout in seconds for downloading the Boost library. The default is 600 seconds.

    For example, if you normally build MySQL placing the object output in the bld subdirectory of your MySQL source tree, you can build with Boost like this:

    mkdir bld
    cd bld
    cmake .. -DDOWNLOAD_BOOST=ON -DWITH_BOOST=$HOME/my_boost

    This causes Boost to be downloaded into the my_boost directory under your home directory. If the required Boost version is already there, no download is done. If the required Boost version changes, the newer version is downloaded.

    If Boost is already installed locally and your compiler finds the Boost header files on its own, it may not be necessary to specify the preceding CMake options. However, if the version of Boost required by MySQL changes and the locally installed version has not been upgraded, you may have build problems. Using the CMake options should give you a successful build.

    With the above settings that allow Boost download into a specified location, when the required Boost version changes, you need to remove the bld folder, recreate it, and perform the cmake step again. Otherwise, the new Boost version might not get downloaded, and compilation might fail.

  • -DWITH_CLIENT_PROTOCOL_TRACING=bool

    Whether to build the client-side protocol tracing framework into the client library. By default, this option is enabled.

    For information about writing protocol trace client plugins, see Section 29.2.4.11, “Writing Protocol Trace Plugins”.

    See also the WITH_TEST_TRACE_PLUGIN option.

  • -DWITH_CURL=curl_type

    The location of the curl library. curl_type can be system (use the system curl library) or a path name to the curl library.

  • -DWITH_DEBUG=bool

    Whether to include debugging support.

    Configuring MySQL with debugging support enables you to use the --debug="d,parser_debug" option when you start the server. This causes the Bison parser that is used to process SQL statements to dump a parser trace to the server's standard error output. Typically, this output is written to the error log.

    Sync debug checking for the InnoDB storage engine is defined under UNIV_DEBUG and is available when debugging support is compiled in using the WITH_DEBUG option. When debugging support is compiled in, the innodb_sync_debug configuration option can be used to enable or disable InnoDB sync debug checking.

    Enabling WITH_DEBUG also enables Debug Sync. This facility is used for testing and debugging. When compiled in, Debug Sync is disabled by default at runtime. To enable it, start mysqld with the --debug-sync-timeout=N option, where N is a timeout value greater than 0. (The default value is 0, which disables Debug Sync.) N becomes the default timeout for individual synchronization points.

    Sync debug checking for the InnoDB storage engine is available when debugging support is compiled in using the WITH_DEBUG option.

    For a description of the Debug Sync facility and how to use synchronization points, see MySQL Internals: Test Synchronization.

  • -DWITH_DEFAULT_FEATURE_SET=bool

    Whether to use the flags from cmake/build_configurations/feature_set.cmake.

  • -DWITH_EDITLINE=value

    Which libedit/editline library to use. The permitted values are bundled (the default) and system.

  • -DWITH_ICU={icu_type|path_name}

    MySQL uses International Components for Unicode (ICU) to support regular expression operations. The WITH_ICU option indicates the type of ICU support to include or the path name to the ICU installation to use.

    • icu_type can be one of the following values:

      • bundled: Use the ICU library bundled with the distribution. This is the default, and is the only supported option for Windows.

      • system: Use the system ICU library.

    • path_name is the path name to the ICU installation to use. This can be preferable to using the icu_type value of system because it can prevent CMake from detecting and using an older or incorrect ICU version installed on the system. (Another permitted way to do the same thing is to set WITH_ICU to system and set the CMAKE_PREFIX_PATH option to path_name.)

  • -DWITH_INNODB_EXTRA_DEBUG=bool

    Whether to include extra InnoDB debugging support.

    Enabling WITH_INNODB_EXTRA_DEBUG turns on extra InnoDB debug checks. This option can only be enabled when WITH_DEBUG is enabled.

  • -DWITH_GMOCK=path_name

    The path to the googlemock distribution, for use with Google Test-based unit tests. The option value is the path to the distribution Zip file. Alternatively, set the WITH_GMOCK environment variable to the path name. It is also possible to use -DENABLE_DOWNLOADS=1 and CMake will download the distribution from GitHub.

    If you build MySQL without the Google Test-based unit tests (by configuring wihout WITH_GMOCK), CMake displays a message indicating how to download it.

  • -DWITH_INNODB_MEMCACHED=bool

    Whether to generate memcached shared libraries (libmemcached.so and innodb_engine.so).

  • -DWITH_JEMALLOC=bool

    Whether to link with -ljemalloc. If enabled, built-in malloc(), calloc(), realloc(), and free() routines are disabled. The default is OFF.

    This option was added in MySQL 8.0.16.

  • -DWITH_KEYRING_TEST=bool

    Whether to build the test program that accompanies the keyring_file plugin. The default is OFF. Test file source code is located in the plugin/keyring/keyring-test directory.

  • -DWITH_LIBEVENT=string

    Which libevent library to use. Permitted values are bundled (default), system, and yes. If you specify system or yes, the system libevent library is used if present. If the system library is not found, the bundled libevent library is used. The libevent library is required by InnoDB memcached.

  • -DWITH_LIBWRAP=bool

    Whether to include libwrap (TCP wrappers) support.

  • -DWITH_LOCK_ORDER=bool

    Whether to enable LOCK_ORDER tooling. By default, this option is disabled and server builds contain no tooling. If tooling is enabled, the LOCK_ORDER tool is available and can be used as described in Section 29.5.3, “The LOCK_ORDER Tool”.

    Note

    With the WITH_LOCK_ORDER option enabled, MySQL builds require the flex program.

    This option was added in MySQL 8.0.17.

  • -DWITH_LSAN=bool

    Whether to run LeakSanitizer, without AddressSanitizer. The default is OFF.

    This option was added in MySQL 8.0.16.

  • -DWITH_LTO=bool

    Whether to enable the link-time optimizer, if the compiler supports it. The default is OFF.

    This option was added in MySQL 8.0.13.

  • -DWITH_LZ4=lz4_type

    The WITH_LZ4 indicates the source of zlib support:

    • bundled: Use the lz4 library bundled with the distribution. This is the default.

    • system: Use the system lz4 library. If WITH_LZ4 is set to this value, the lz4_decompress utility is not built. In this case, the system lz4 command can be used instead.

  • -DWITH_MSAN=bool

    Whether to enable MemorySanitizer, for compilers that support it. The default is off.

    For this option to have an effect if enabled, all libraries linked to MySQL must also have been compiled with the option enabled.

  • -DWITH_MECAB={disabled|system|path_name}

    Use this option to compile the MeCab parser. If you have installed MeCab to its default installation directory, set -DWITH_MECAB=system. The system option applies to MeCab installations performed from source or from binaries using a native package management utility. If you installed MeCab to a custom installation directory, specify the path to the MeCab installation. For example, -DWITH_MECAB=/opt/mecab. If the system option does not work, specifying the MeCab installation path should work in all cases.

    For related information, see Section 12.9.9, “MeCab Full-Text Parser Plugin”.

  • -DWITH_MSCRT_DEBUG=bool

    Whether to enable Visual Studio CRT memory leak tracing. The default is OFF.

  • -DWITH_MYSQLX=bool

    Whether to build with support for X Plugin. Default ON. See Chapter 20, Using MySQL as a Document Store.

  • -DWITH_NUMA=bool

    Explicitly set the NUMA memory allocation policy. CMake sets the default WITH_NUMA value based on whether the current platform has NUMA support. For platforms without NUMA support, CMake behaves as follows:

    • With no NUMA option (the normal case), CMake continues normally, producing only this warning: NUMA library missing or required version not available

    • With -DWITH_NUMA=ON, CMake aborts with this error: NUMA library missing or required version not available

  • -DWITH_PROTOBUF=protobuf_type

    Which Protocol Buffers package to use. protobuf_type can be one of the following values:

    • bundled: Use the package bundled with the distribution. This is the default.

    • system: Use the package installed on the system.

    Other values are ignored, with a fallback to bundled.

  • -DWITH_RAPID=bool

    Whether to build the rapid development cycle plugins. When enabled, a rapid directory is created in the build tree containing these plugins. When disabled, no rapid directory is created in the build tree. The default is ON, unless the rapid directory is removed from the source tree, in which case the default becomes OFF.

  • -DWITH_RAPIDJSON=rapidjson_type

    The type of RapidJSON library support to include. rapidjson_type can be one of the following values:

    • bundled: Use the RapidJSON library bundled with the distribution. This is the default.

    • system: Use the system RapidJSON library. Version 1.1.0 or higher is required.

    This option was added in MySQL 8.0.13.

  • -DWITH_LZMA=lzma_type

    The type of LZMA library support to include. lzma_type can be one of the following values:

    • bundled: Use the LZMA library bundled with the distribution. This is the default.

    • system: Use the system LZMA library.

    This option was removed in MySQL 8.0.16.

  • -DWITH_RE2=re2_type

    The type of RE2 library support to include. re2_type can be one of the following values:

    • bundled: Use the RE2 library bundled with the distribution. This is the default.

    • system: Use the system RE2 library.

    As of MySQL 8.0.18, MySQL no longer uses the RE2 library and this option was removed.

  • -DWITH_ROUTER=bool

    Whether to build MySQL Router. The default is ON.

    This option was added in MySQL 8.0.16.

  • -DWITH_SSL={ssl_type|path_name}

    The type of SSL support to include or the path name to the OpenSSL installation to use.

    • ssl_type can be one of the following values:

      • system: Use the system OpenSSL library. This is the default.

        On macOS and Windows, using system builds as if CMake was invoked with path_name and points to the installed OpenSSL library. This is because they do not have system SSL libraries. On macOS, brew install openssl installs to /usr/local/opt/openssl and system will find it. On Windows, it checks %ProgramFiles%/OpenSSL, %ProgramFiles%/OpenSSL-Win32, %ProgramFiles%/OpenSSL-Win64, C:/OpenSSL, C:/OpenSSL-Win32, and C:/OpenSSL-Win64.

      • yes: This is a synonym for system.

      • wolfssl: Use the wolfSSL library. To use this option value, you must follow the instructions in the extra/README-wolfssl.txt file.

    • path_name is the path name to the OpenSSL installation to use. This can be preferable to using the ssl_type value of system because it can prevent CMake from detecting and using an older or incorrect OpenSSL version installed on the system. (Another permitted way to do the same thing is to set WITH_SSL to system and set the CMAKE_PREFIX_PATH option to path_name.)

    For information about using SSL support, see Section 6.3, “Using Encrypted Connections”.

  • -DWITH_SYSTEMD=bool

    Whether to enable installation of systemd support files. By default, this option is disabled. When enabled, systemd support files are installed, and scripts such as mysqld_safe and the System V initialization script are not installed. On platforms where systemd is not available, enabling WITH_SYSTEMD results in an error from CMake.

    For more information about using systemd, see Section 2.5.9, “Managing MySQL Server with systemd”. That section also includes information about specifying options previously specified in [mysqld_safe] option groups. Because mysqld_safe is not installed when systemd is used, such options must be specified another way.

  • -DWITH_SYSTEM_LIBS=bool

    This option serves as an umbrella option to set the system value of any of the following CMake options that are not set explicitly: WITH_CURL, WITH_EDITLINE, WITH_ICU, WITH_LIBEVENT, WITH_LZ4, WITH_LZMA, WITH_PROTOBUF, WITH_RE2, WITH_SSL, WITH_ZLIB.

  • -DWITH_TEST_TRACE_PLUGIN=bool

    Whether to build the test protocol trace client plugin (see Section 29.2.4.11.1, “Using the Test Protocol Trace Plugin”). By default, this option is disabled. Enabling this option has no effect unless the WITH_CLIENT_PROTOCOL_TRACING option is enabled. If MySQL is configured with both options enabled, the libmysqlclient client library is built with the test protocol trace plugin built in, and all the standard MySQL clients load the plugin. However, even when the test plugin is enabled, it has no effect by default. Control over the plugin is afforded using environment variables; see Section 29.2.4.11.1, “Using the Test Protocol Trace Plugin”.

    Note

    Do not enable the WITH_TEST_TRACE_PLUGIN option if you want to use your own protocol trace plugins because only one such plugin can be loaded at a time and an error occurs for attempts to load a second one. If you have already built MySQL with the test protocol trace plugin enabled to see how it works, you must rebuild MySQL without it before you can use your own plugins.

    For information about writing trace plugins, see Section 29.2.4.11, “Writing Protocol Trace Plugins”.

  • -DWITH_TSAN=bool

    Whether to enable the ThreadSanitizer, for compilers that support it. The default is off.

  • -DWITH_UBSAN=bool

    Whether to enable the Undefined Behavior Sanitizer, for compilers that support it. The default is off.

  • -DWITH_UNIT_TESTS={ON|OFF}

    If enabled, compile MySQL with unit tests. The default is ON unless the server is not being compiled.

  • -DWITH_UNIXODBC=1

    Enables unixODBC support, for Connector/ODBC.

  • -DWITH_VALGRIND=bool

    Whether to compile in the Valgrind header files, which exposes the Valgrind API to MySQL code. The default is OFF.

    To generate a Valgrind-aware debug build, -DWITH_VALGRIND=1 normally is combined with -DWITH_DEBUG=1. See Building Debug Configurations.

  • -DWITH_ZLIB=zlib_type

    Some features require that the server be built with compression library support, such as the COMPRESS() and UNCOMPRESS() functions, and compression of the client/server protocol. The WITH_ZLIB indicates the source of zlib support:

    • bundled: Use the zlib library bundled with the distribution. This is the default.

    • system: Use the system zlib library. If WITH_ZLIB is set to this value, the zlib_decompress utility is not built. In this case, the system openssl zlib command can be used instead.

Compiler Flags

  • -DCMAKE_C_FLAGS="flags"

    Flags for the C Compiler.

  • -DCMAKE_CXX_FLAGS="flags"

    Flags for the C++ Compiler.

  • -DWITH_DEFAULT_COMPILER_OPTIONS=bool

    Whether to use the flags from cmake/build_configurations/compiler_options.cmake.

    Note

    All optimization flags were carefully chosen and tested by the MySQL build team. Overriding them can lead to unexpected results and is done at your own risk.

To specify your own C and C++ compiler flags, for flags that do not affect optimization, use the CMAKE_C_FLAGS and CMAKE_CXX_FLAGS CMake options.

When providing your own compiler flags, you might want to specify CMAKE_BUILD_TYPE as well.

For example, to create a 32-bit release build on a 64-bit Linux machine, do this:

mkdir bld
cd bld
cmake .. -DCMAKE_C_FLAGS=-m32 \
  -DCMAKE_CXX_FLAGS=-m32 \
  -DCMAKE_BUILD_TYPE=RelWithDebInfo

If you set flags that affect optimization (-Onumber), you must set the CMAKE_C_FLAGS_build_type and/or CMAKE_CXX_FLAGS_build_type options, where build_type corresponds to the CMAKE_BUILD_TYPE value. To specify a different optimization for the default build type (RelWithDebInfo) set the CMAKE_C_FLAGS_RELWITHDEBINFO and CMAKE_CXX_FLAGS_RELWITHDEBINFO options. For example, to compile on Linux with -O3 and with debug symbols, do this:

cmake .. -DCMAKE_C_FLAGS_RELWITHDEBINFO="-O3 -g" \
  -DCMAKE_CXX_FLAGS_RELWITHDEBINFO="-O3 -g"

CMake Options for Compiling NDB Cluster

The following options are for use when building MySQL 8.0 sources with NDB Cluster support.

  • -DMEMCACHED_HOME=dir_name

    Perform the build using the memcached (version 1.6 or later) installed in the system directory indicated by dir_name. Files from this installation that are used in the build include the memcached binary, header files, and libraries, as well as the memcached_utilities library and the header file engine_testapp.h.

    You must leave this option unset when building ndbmemcache using the bundled memcached sources (WITH_BUNDLED_MEMCACHED option); in other words, the bundled sources are used by default).

    While additional CMake options—such as for SASL authorization and for providing dtrace support—are available for use when compiling memcached from external sources, these options are currently not enabled for the memcached sources bundled with NDB Cluster.

  • -DWITH_BUNDLED_LIBEVENT={ON|OFF}

    Use the libevent included in the NDB Cluster sources when building NDB Cluster with ndbmemcached support. Enabled by default. OFF causes the system's libevent to be used instead.

  • -DWITH_BUNDLED_MEMCACHED={ON|OFF}

    Build the memcached sources included in the NDB Cluster source tree, then use the resulting memcached server when building the ndbmemcache engine. In this case, make install places the memcached binary in the installation bin directory, and the ndbmemcache engine shared library file ndb_engine.so in the installation lib directory.

    This option is ON by default.

  • -DWITH_CLASSPATH=path

    Sets the classpath for building NDB Cluster Connector for Java. The default is empty. This option is ignored if -DWITH_NDB_JAVA=OFF is used.

  • -DWITH_ERROR_INSERT={ON|OFF}

    Enables error injection in the NDB kernel. For testing only; not intended for use in building production binaries. The default is OFF.

  • -DWITH_NDBCLUSTER_STORAGE_ENGINE={ON|OFF}

    This is an alias for WITH_NDBCLUSTER.

  • -DWITH_NDBCLUSTER={ON|OFF}

    Build and link in support for the NDB (NDBCLUSTER) storage engine in mysqld. The default is ON.

  • -DWITH_NDBMTD={ON|OFF}

    Build the multithreaded data node executable ndbmtd. The default is ON.

  • -DWITH_NDB_BINLOG={ON|OFF}

    Enable binary logging by default in the mysqld built using this option. ON by default.

  • -DWITH_NDB_DEBUG={ON|OFF}

    Enable building the debug versions of the NDB Cluster binaries. OFF by default.

  • -DWITH_NDB_JAVA={ON|OFF}

    Enable building NDB Cluster with Java support, including ClusterJ.

    This option is ON by default. If you do not wish to compile NDB Cluster with Java support, you must disable it explicitly by specifying -DWITH_NDB_JAVA=OFF when running CMake. Otherwise, if Java cannot be found, configuration of the build fails.

  • -DWITH_NDB_PORT=port

    Causes the NDB Cluster management server (ndb_mgmd) that is built to use this port by default. If this option is unset, the resulting management server tries to use port 1186 by default.

  • -DWITH_NDB_TEST={ON|OFF}

    If enabled, include a set of NDB API test programs. The default is OFF.

  • -DWITH_PLUGIN_NDBCLUSTER={ON|OFF}

    Alias for WITH_NDBCLUSTER.